Cut ’n’ Polish is a blend of two waxes with a fine abrasive held in suspension within them.


This is my 'go-to' abrasive wax I regularly use on the majority of my work (anything which isn't being coloured basically!), and it does not darken the wood any more than sanding sealers/oils/waxes as it is clear on application.


This is a soft wax designed to stay ‘wet’ slightly longer during application, allowing it to lubricate the abrasive to give a very fine cut to the timber and also to collect any dust generated during use and some subsequent sanding, preventing it from entering the workshop atmosphere.


On bare wood; sand to 240 grit as normal, apply a coat of Cut ’n’ Polish with the lathe stopped, then switch on the lathe and buff to a soft sheen whilst smoothing the timber at the same time.

On sealed wood apply after the sealer in the same way, polishing to a slightly higher shine.


Cut ’n’ Polish dries almost immediately and can be overcoated with Friction Polish or any of Chestnut's waxes for a higher shine.

Chestnut Products - Cut 'n' Polish - 225ml

  • Finishing products are classed as hazardous goods, therefore have to be handled and transported accordingly.

    Therefore ANY orders containing finishing products MUST be sent via DHL at a cost from £7.45. This is non-negotiable.

    This delivery service is Next Working Day - as long as orders are placed BEFORE 1PM!!

© 2017 the tiny turner

  • YouTube
  • Facebook Clean
  • Twitter Clean

+44 7709 610089